Skip to content

St. Louis Tuckpointing Cost

How much does tuckpointing cost in St. Louis? It depends mostly on wall area and height. Typical 2026 ranges for wall tuckpointing and individual brick replacement are listed just below, and chimney work is quote-only.

Red brick St. Louis home with arched front door and stone steps in natural light, tuckpointing cost St. Louis MO

2026 ranges

Typical 2026 ranges for St. Louis wall tuckpointing and individual brick replacement:

Walls are measured in square feet of masonry, not the living area of the house. Historic or lime-mortar work, stone work, foundation repair, lintel replacement, waterproofing, walls over 1,000 sq ft, and more than 50 replaced bricks are also quote-only. Contact us for exact pricing.

Worked examples

Here is what the calculator returns for a few sample jobs. Each priced result is an estimate, not a quote.

  • 100 sq ft of wall tuckpointing, under 8 ft: $1,425 to $1,575.
  • 100 sq ft of wall tuckpointing, 8 ft and over: $1,725 to $1,925.
  • 20 sq ft of wall tuckpointing, under 8 ft: $300 to $320.
  • Typical single-story chimney tuckpointing: quote-only. The calculator returns this line, verbatim: Quote only. Chimney work needs an on-site look. Contact us for exact pricing.
  • Two-or-more-story chimney: quote-only. The calculator returns the same chimney quote-only line, not a dollar band.
  • Historic or lime mortar: quote-only. The calculator returns this line, verbatim: Quote only. Historic or lime-mortar work needs an on-site quote. Contact us for exact pricing.
  • Stone work: quote-only. The calculator returns this line, verbatim: Quote only. Stone work needs an on-site quote. Contact us for exact pricing.
  • 51 replaced bricks: quote-only. The calculator returns this line, verbatim: Quote only. More than 50 replaced bricks is priced as a section rebuild and needs an on-site quote. Contact us for exact pricing.
  • 1,001 sq ft of wall tuckpointing: quote-only. The calculator returns this line, verbatim: Quote only. Walls over 1,000 sq ft, including whole-house packages, need an on-site quote. Contact us for exact pricing.
  • 10 replaced bricks: $360 to $410.
  • 400 sq ft of wall tuckpointing, under 8 ft: $5,700 to $6,300.

Contact us for exact pricing.

Full calculator

Use the calculator on this page for a typical range, then send a quote request for exact pricing.

Inputs:

  • Service: wall / chimney / brick
  • Wall: whole-number wall sq ft (20 to 1,000) and height (under 8 ft, or 8 ft and over)
  • Brick: whole-number brick count (1 to 50)
  • Chimney: 1-story or 2+ stories. There is no square-foot input on this chimney row. Every chimney result is quote-only.
  • Mortar: standard / historic or lime. Historic or lime is quote-only.
  • Material: brick / stone. Stone is quote-only.

Rules the widget follows:

  • Do not add a second story toggle on wall jobs. Height already covers access.
  • Do not show a standalone minimum dollar.
  • Every priced result is labeled Estimate, not a quote, plus the disclaimer below.
  • Quote-only results show the matching quote-only line only. Do not show the "Estimate, not a quote" disclaimer on those results.
  • Every chimney job returns: Quote only. Chimney work needs an on-site look. Contact us for exact pricing.
  • Historic or lime returns: Quote only. Historic or lime-mortar work needs an on-site quote. Contact us for exact pricing.
  • Stone returns: Quote only. Stone work needs an on-site quote. Contact us for exact pricing.
  • More than 50 bricks returns: Quote only. More than 50 replaced bricks is priced as a section rebuild and needs an on-site quote. Contact us for exact pricing.
  • Walls over 1,000 sq ft return: Quote only. Walls over 1,000 sq ft, including whole-house packages, need an on-site quote. Contact us for exact pricing.
  • Other rejected or out-of-range entries return: Quote only. This entry is outside what the calculator can price. Contact us for exact pricing.
Service
Wall height
Mortar
Material

Your rough range

Estimate, not a quote

$1,425 to $1,575

Contact us for exact pricing.

Estimate, not a quote. Actual price depends on wall area and height, mortar condition, brick or stone type, color matching, access and scaffolding, roof pitch on chimney work, and whether the building sits in a historic district. This wall estimate is for standard mortar on brick, on the selected height. Historic or lime-mortar work, stone work, foundation repair, lintel replacement, and waterproofing are quote-only. Chimney work is quote-only. Contact us for exact pricing. This tool does not include permit fees.

Request a quote

Call (557) 557-5011

What changes the price

Area, height, and access are the first three. A larger wall uses more joint work. Walls 8 ft and over are in a higher unit range because access and scaffolding change the work. Mortar condition, color matching, and whether the building sits in a historic district can move a quote as well. Historic or lime mortar, and stone, are quote-only. Roof pitch matters on chimney work, and every chimney job is quote-only. We look at them on the visit.

What the calculator does not price

The calculator does not price chimney work, historic or lime mortar, stone work, foundation repair, lintel replacement, waterproofing, walls over 1,000 sq ft (including whole-house packages), more than 50 replaced bricks, or permits. Those jobs need an on-site quote. This tool does not include permit fees.

FAQ

How much does tuckpointing cost in St. Louis?

In 2026, typical wall tuckpointing runs $14.25 to $15.75 per wall sq ft for walls under 8 ft, and $17.34 to $19.16 per wall sq ft at 8 ft and over. Individual brick replacement has its own per-brick range, listed above, and chimney work is quote-only. Contact us for exact pricing.

How is wall area measured?

The calculator asks for wall square feet of the masonry face, not the living area inside the house. If you can estimate length times height of the wall, enter that, and we will confirm it on the visit.

Why does height change the range?

Once a wall reaches 8 ft, access and scaffolding change the work, so the range goes up to $17.34 to $19.16 per wall sq ft. Walls under 8 ft stay in the lower range. Contact us for exact pricing.

Why is chimney work quote-only?

Every chimney job is quote-only, including a typical 1-story stack. Height, roof pitch, and access change the work too much to publish a range, so we look at the chimney on site.

Do these numbers include permits?

No. This tool does not include permit fees.

How close is the range to the final price?

The calculator uses typical 2026 ranges for standard mortar on brick at the wall height you pick, or for individual replaced bricks. The final price depends on the wall, the mortar, the brick or stone, color matching, access, and whether the building sits in a historic district, so we confirm it on site.

Call (557) 557-5011Request a quote