St. Louis Tuckpointing
Open or crumbling mortar joints let rain into a brick wall. Tuckpointing cuts out the failed mortar and replaces it, while the sound brick stays in place. Wall area, height, and mortar condition shape the price, and you can check a typical range on our tuckpointing cost calculator.

What tuckpointing is
Tuckpointing cuts out the bad mortar and tools new mortar into the joint, so it sheds water and sits cleanly with the brick around it. If you are weighing the words tuckpointing and repointing, see tuckpointing vs repointing. If some bricks are cracked or flaking, brick repair covers replacing them.
When mortar failure shows up
In a brick city, failed mortar often shows up after freeze-thaw. Water sits in a weak joint, the freeze opens it further, and the next season looks worse. Crumbling joints, gaps you can see, and loose brick are the usual signs. If you are not sure whether the wall needs joint work or brick replacement, send a quote request and we will look at both.
If the building sits in a historic district, mortar and color choices may need review before work starts. Tuckpointing vs repointing explains what that review can change. Historic or lime-mortar work is quote-only.
Wall height and access
Taller walls take more work to reach. Walls 8 ft and over usually need scaffolding, so they fall in a higher range than walls under 8 ft. Color matching is part of the visit too. We look at the existing mortar and talk through how close a match can get. A perfect match is not always possible.
Typical 2026 ranges and worked examples are on our tuckpointing cost calculator.
How it works
- 1Send a quote request or call (557) 557-5011.
- 2We look at the joints, the brick, and how we will reach the wall.
- 3We complete the agreed joint repair, then check the site.
Request a quote
FAQ
How do I know I need tuckpointing?
Look for crumbling mortar, open joints, or brick that has started to loosen. In St. Louis, those signs often show up after freeze-thaw. If water stains are showing on the inside face of a wall, that is another reason to have the joints looked at. We confirm what the wall needs on the visit.
How is wall area measured?
We measure wall square feet of masonry, not the living area of the house. Length times the height of the masonry face is the usual start. If you know an approximate wall sq ft, put it in the form or the calculator. We confirm the area on site.
Does wall height change the price?
Yes. Walls under 8 ft and walls 8 ft and over have different ranges, because access and scaffolding change the work. See the tuckpointing cost calculator for the 2026 ranges.
How long does a typical wall job take?
It depends on the area, the height, and the condition of the mortar. We will talk through timing on the visit.
Can you repair the mortar without replacing the bricks?
Yes. When the bricks are sound and only the joints have failed, tuckpointing replaces the mortar and leaves the brick in place. Damaged bricks are a separate repair, covered on brick repair.